Sign In

How to Maintain Bike’s Carburettor?

Steps to successfully maintain your bike's carburettor

A carburettor is one of the most vital parts of a two-wheeler. If it gets dirty or bad, it can create several types of problems. If you don't use your bike frequently or charge the engine, then the fuel inside the carburettor can get old, thereby thickening and causing the small parts to stick. The actual work of a carburettor is to regulate the amount of air and fuel going inside the cylinders. Hence, it is essential to keep this vital part clean and in good condition. If you get your carburettor repaired by a professional, the entire servicing can rack up the costs. While cleaning a carburettor by yourself can be a cumbersome job, it can save you a lot of money in the long run.

Here are the steps involved to successfully clean your bike's carburettor -

Removing the Carburettor

Start by draining all the fuel that may be present inside the carburettor into the oil catch pan. Then, discard the fuel safely. Check the user manual to have a better understanding of the process. A carburettor is made of aluminium, which means it can be scratched be easily. Therefore, it is advised to be patient with the whole process. Remember, all the wires you disconnected to remove the carburettor as it will make your re-installing process easier. Make the parts with coloured tapes for ease of understanding.

Cleaning the Float Bowl

Place the carburettor gently on a clean cloth and use a screwdriver to remove the float bowl. In case the float bowl is stuck, give a gentle tap on the carburettor to loosen it up. Once the bowl is out, clean it with the right cleaner and a rag. Remove the bowl drain and then clean the other parts of carburettor.

All the Little Pieces

Check all the parts thoroughly and see if anything is damaged or corroded. Also, notice areas that have excessive build-up. Wash that area with a toothbrush by scrubbing off the gunk. You can even use a toothpick to get the grim off tight places. After cleaning the build-up, spray the area with carb cleaner and wipe down.

Check all the vital parts like float, float valve, seat, pilot jet, airscrews, jet holder, and throttle slide. You can even use compressed air to force build up out of any openings and tubes.

Reassembling the Carburettor

Spray all the parts with carb cleaner and shine them off with a clean rag. Reassemble the pieces correctly and ensure you have fitted the parts tightly. Re-attach the carburettor to the wires you removed it from, and fix it cautiously back into place. When screwing in the jets, ensure you don't overdo it or use extra force while putting the parts back together.

With the help of a carburettor synchronizer and your bike manual, you will get done with the cleaning process quickly. After the cleaning, your bike's engine will have more power and feel more responsive. Riding will be more fun together!

Apart from keeping your bike clean, you should also ensure that your rides are safe. To have a hassle-free ride on the streets, protect your bike with a bike insurance policy. A two wheeler insurance policy covers your bike against several unfortunate circumstances. Keep yourself safe, have a fantastic ride!