Sign In

How To Change Your Car’s Windshield Wiper Blades?

​A study has shown that more than 46% of weather-related fatalities on the road happens because of rainy weather. That's why windshield wipers are an important component of your car's safety system. If your windshield wipers are not working well, make sure you get it to change immediately, especially in monsoon season. Faulty wiper blades can create visibility issues, which can lead to accidents. That's why it is advisable to insure your car with car insurance, as it will provide financial support in the time of need. To help you change your car's windshield wiper blades, we have come up with a step by step guide. Read below to learn how to inspect your wipers, and change it:​

Inspect Your Wipers


When you are driving a car, nothing is more important than good visibility and wipers ensure that to see properly. It is advisable to replace wipers every six months. Before you replace wipers, you should learn the best way to check them. You should regularly inspect your wiper blades, even if you don't think they need replacing. This habit of frequently checking the condition of your blades will make sure that you never go on the road with faulty wipers. Given below are the things that you should inspect:

  • Metal corrosion
  • Cracks or chips in the blades
  • Inflexible squeegee rubber
  • Broken frame
  • A lack of grip when moving​
  • How To Replace Your Wiper Blades


    Once you have successfully inspected, you can change your windshield wipers. These blades consist of three basic parts: the blade that attaches to the wiper arm, the lower wiper arm that protrudes up from the cowl, and the rubber refill that wipes the glass. This rubber refill part of the windshield is thin and because of that, it is the one that breaks down due to extreme weather conditions, dust, and dirt. Wiper refill is the part that gets mostly replaced. However, the blade can also become weak and lose its tension against the glass. Replace the entire blade, in case no part of the blade is contacting the windshield. Given below are the steps that can help you replace wiper blades by yourself:

  • Determine The Blade Size:

  • Firstly, you should measure the length of your car's wiper blade or check your car's manual for the correct blade size.​

  • Take Off The Old Wiper Blades:

  • Then you should lift the wiper arm away from the windshield by pressing the small tab on the underside of the wiper where it meets with the wiper arm.

  • Put The New Wiper Blades On:

  • Then put new wiper blades by pulling the wiper blade tight onto the arm. Once you hear a clicking sound that means it is locked.

  • Test Them Out:

  • Once you are done with putting a new wiper blade, make sure you run the wipers to see if they are working properly. It's better to check immediately after you installed it instead of finding out in the middle of a downpour.

    Above mentioned steps will surely help you change your car's windshield wipers efficiently. Also, make sure you buy car insurance onlineto get financial support in case of emergencies.